Advertisement

Steel Coil Weight Chart

Coils on a 20 inch core (508 mm ID)

Carbon steel at 7,850 kg/m³, solid ring with no air gaps. Width columns show the total coil weight in lb. Scroll the table sideways on a phone.

OD (in)OD (mm)PIW (lb/in)kg per mm of width36 in wide (lb)48 in wide (lb)60 in wide (lb)72 in wide (lb)
36914199.63.567,1859,58011,97414,369
421,067303.85.4310,93714,58318,22921,875
481,219424.17.5715,26720,35725,44630,535
541,372560.410.0120,17526,90033,62540,349
601,524712.812.7325,65934,21342,76651,319
661,676881.215.7431,72242,29552,86963,443
721,8291,065.619.0338,36151,14863,93576,722

Coils on a 24 inch core (610 mm ID)

The bigger core leaves less steel on the coil for the same outside diameter, so every value is a little lower.

OD (in)OD (mm)PIW (lb/in)kg per mm of width36 in wide (lb)48 in wide (lb)60 in wide (lb)72 in wide (lb)
36914160.42.865,7737,6989,62211,547
421,067264.64.739,52612,70115,87719,052
481,219384.96.8713,85618,47523,09427,712
541,372521.29.3118,76325,01831,27237,527
601,524673.612.0324,24832,33140,41448,496
661,676842.015.0430,31040,41450,51760,620
721,8291,026.418.3336,95049,26661,58373,899

Coil weight in kilograms

The two most common widths, converted to kg.

OD (in)ID 20 in, 48 in wide (kg)ID 20 in, 60 in wide (kg)ID 24 in, 48 in wide (kg)ID 24 in, 60 in wide (kg)
364,3455,4323,4924,365
426,6158,2685,7617,202
489,23411,5428,38010,475
5412,20115,25211,34814,185
6015,51919,39814,66518,331
6619,18523,98118,33122,914
7223,20029,00022,34727,933

Size not listed? The steel coil calculator takes any width, inside and outside diameter.

Advertisement

How to use this coil weight chart

Weight per inch of width (PIW) and full coil weight for the most common steel coil sizes, read straight off the table.

Find the table for your coil's inside diameter, go down to the row for its outside diameter, and read across. The PIW column is the weight for each inch of strip width; the width columns are already multiplied out for 36, 48, 60 and 72 inch wide coils. Yard staff, buyers and freight planners use these numbers to check a coil tag, size a crane or coil car, or split a truckload by weight.

Thickness does not appear anywhere in the chart. A coil's weight depends only on how much steel sits between the eye and the outside wrap, not on how many wraps that steel is divided into. A 60 inch coil of 10 gauge weighs the same as a 60 inch coil of 20 gauge if the core and width are the same.

How the chart values are calculated

The end of a coil is a ring. The ring area times the width gives the volume of steel, and the volume times the density gives the weight.

Metric formula

Weight (kg) = 0.7854 × (OD² − ID²) × Width × 7,850, with all sizes in metres

0.7854 is π ÷ 4. For sizes in millimetres, divide the result by 1,000,000,000.

Imperial formula

PIW (lb/in) = 0.7854 × (OD² − ID²) × 0.2836, then Weight (lb) = PIW × Width (in)

0.2836 lb/in³ is carbon steel at 7,850 kg/m³. Working in PIW first is handy because one PIW figure covers every width slit from the same master coil.

Worked example 1: metric

A coil is 1,250 mm wide, with a 610 mm inside diameter and a 1,600 mm outside diameter. Ring area = 0.7854 × (1.6² − 0.61²) = 1.7184 m². Volume = 1.7184 × 1.25 = 2.148 m³. Weight = 2.148 × 7,850 = 16,862 kg, about 37,173 lb.

Worked example 2: imperial

A coil has a 20 in ID and a 60 in OD. PIW = 0.7854 × (60² − 20²) × 0.2836 = 0.7854 × 3,200 × 0.2836 = 712.8 lb/in, the same as the chart. For a 48 in wide coil, weight = 712.8 × 48 = 34,213 lb, or about 15,519 kg.

Density and other metals

The chart is for carbon steel at 7,850 kg/m³. To reuse it for another metal, multiply by the ratio of densities. These are typical values; check your grade if you need a close figure.

Stainless steel at 8,000 kg/m³: multiply by about 1.019, so the 48 in wide coil above is about 34,866 lb. Aluminum at 2,700 kg/m³: multiply by about 0.344, giving about 11,767 lb. For aluminum there is also a dedicated aluminum coil weight calculator, and the metal density chart lists more metals.

Patterns worth knowing

Weight grows with the square of the outside diameter, not in a straight line. On a 20 inch core, going from a 60 in to a 72 in OD adds only 20 percent to the diameter but about 49.5 percent to the weight. That is why a small error in a tape measurement of the OD makes a big difference.

The core matters less than the outside. Moving from a 20 in to a 24 in ID removes the same 39.2 lb of PIW at every outside diameter, because it only takes away the steel that would sit between 20 and 24 inches.

Real coils are slightly lighter than a solid ring because of small gaps between wraps, edge wave and loose outer laps. If your scale weights run consistently a few percent under the chart, that is normal.

Frequently asked questions

How much does a steel coil weigh?

It depends on the width, inside diameter and outside diameter. In this chart the coils range from about 5,773 lb for a 36 inch wide coil with a 24 inch ID and 36 inch OD, up to about 76,722 lb for a 72 inch wide coil with a 20 inch ID and 72 inch OD.

How much does a 48 inch wide steel coil weigh?

On a 20 inch core, a 48 inch wide coil weighs about 34,213 lb at a 60 inch OD, about 20,356 lb at a 48 inch OD and about 51,148 lb at a 72 inch OD. Use the 48 inch column of the chart for other sizes.

What PIW does a 60 inch OD coil have?

A carbon steel coil with a 60 inch outside diameter has a PIW of about 712.8 lb per inch on a 20 inch core and about 673.6 lb per inch on a 24 inch core.

Does strip thickness change the coil weight?

No. For the same width, inside diameter and outside diameter, the coil weighs the same whatever the thickness. Thickness only changes how many feet of strip are on the coil.

Can I use this chart for aluminum coils?

Yes, multiply any value by about 0.344, which is 2,700 divided by 7,850. For stainless steel coils multiply by about 1.019.

For an exact figure use the steel coil calculator, or work backwards from a weight with the coil outer diameter calculator.

Keep going

More handy tools

Advertisement