Advertisement

Coil Weight Calculator

Find the weight of a coil from its width, inside diameter and outside diameter. Metric or imperial, with the answer updating as you type.

1Coil size

Default unit
Show weight in

The default unit sets every box. Tap the unit inside any box to change just that one.

Common:

2Material

kg/m³

Coil weight

0 kg

Pounds-
Metric tonnes-
MaterialSteel
Coil length Enter thickness to see length

Live 3D preview

OD - ID - Width -
Advertisement

How it’s calculated

Weight = π ÷ 4 × (OD² − ID²) × Width × Density

Length = π × (OD² − ID²) ÷ (4 × Thickness)

  1. Enter your sizes to see the working here.

How it works

A coil is a hollow cylinder of metal. The calculator finds the area of the ring between the inside and outside diameters, multiplies it by the coil width, then by the material density.

Pick a material or type your own density if you have a grade-specific figure.

The coil is treated as a solid hollow cylinder (100% fill). Results are estimates for planning; always check against your supplier’s data.

Coil weight: how it works

This coil weight calculator finds how heavy a coil of steel, stainless steel or aluminium strip is from its width, inside diameter and outside diameter. It is handy when you are checking a delivery against the mill tag, planning a crane or forklift lift, working out freight or deciding how much of a coil is left on the decoiler. Enter sizes in millimetres or inches, and the answer is shown in kilograms, pounds and metric tonnes.

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density for another grade. If you also enter the strip thickness, the calculator shows the strip length on the coil.

How to calculate coil weight

A coil is a hollow cylinder of metal. The weight is the volume of that cylinder, which is the area of the ring between the two diameters times the coil width, multiplied by the density.

Metric formula

Weight (kg) = π ÷ 4 × (OD² − ID²) × Width × Density, with OD, ID and width in metres and density in kg/m³

If you measure in millimetres, divide the answer by 1,000,000,000 (one billion) because there are that many cubic millimetres in a cubic metre.

Imperial formula

Weight (lb) = π ÷ 4 × (OD² − ID²) × Width × 0.2836, with OD, ID and width in inches

The figure 0.2836 is the density of carbon steel in lb/in³. Use 0.2890 for stainless steel and 0.0975 for aluminium.

Coil length from thickness

Length = π × (OD² − ID²) ÷ (4 × Thickness), all three in the same unit

The ring area at the end of the coil, divided by the strip thickness, is the length of strip wound on it. Multiply that length by the width and thickness to get the same volume, so the two methods agree for a tightly wound coil.

Worked example 1: metric

A steel coil is 1,000 mm wide with a 508 mm inside diameter and a 1,500 mm outside diameter.

Ring area = π ÷ 4 × (1,500² − 508²) = 1,564,463 mm². Volume = 1,564,463 × 1,000 = 1,564,462,876 mm³. Weight = volume × 7,850 ÷ 1,000,000,000 = 12,281 kg, which is about 27,075 lb or 12.28 tonnes. If the strip is 1.5 mm thick, the strip length on the coil is about 1,043 m.

Worked example 2: imperial

A steel coil is 48 in wide with a 20 in inside diameter and a 60 in outside diameter.

Ring area = π ÷ 4 × (60² − 20²) = 2,513.3 in². Volume = 2,513.3 × 48 = 120,637 in³. Weight = volume × 0.2836 = 34,213 lb, which is about 15,519 kg. For 16 gauge strip (0.0598 in) that is roughly 3,502 ft of strip.

Changing only the material shows the effect of density. The metric coil above weighs about 12,516 kg in stainless steel and about 4,224 kg in aluminium.

Density and material factors

The only thing that changes between metals is the density. These are typical values. Published figures vary slightly between sources and grades, so use your supplier's number when you have it.

MaterialDensity (kg/m³)Density (lb/in³)Weight of 1 cubic foot (lb)
Carbon steel7,8500.2836490.1
Stainless steel8,0000.2890499.4
Aluminium2,7000.0975168.6

Stainless grades are often quoted between about 7,900 and 8,000 kg/m³, so a different figure in the density box moves the result by around one percent.

Coil weight per inch and per 100 mm of width

Mills and service centers often quote coil weight per inch of width (PIW), in lb. Multiply the figure below by your width to get the total. These values are for carbon steel at 7,850 kg/m³ and a solid ring with no air gaps.

Outside diameter (in)ID 20 inID 24 inID 30 in
36199.6160.488.2
40267.3228.1155.9
48424.1384.9312.7
54560.4521.2449.0
60712.8673.6601.4
66881.2842.0769.8
721,065.61,026.4954.2

The same idea in metric, in kg for each 100 mm of strip width:

Outside diameter (mm)ID 508 mmID 610 mmID 762 mm
900340.3270.0141.4
1000457.4387.1258.5
1200728.7658.4529.8
14001,049.3979.0850.4
15001,228.11,157.81,029.2
18001,838.51,768.21,639.6

Example: a 48 in wide coil with a 24 in inside diameter and a 60 in outside diameter weighs about 48 × 673.6 = 32,331 lb.

Frequently asked questions

How do I calculate the weight of a steel coil?

Find the area of the ring between the outside and inside diameters, multiply by the coil width to get the volume, then multiply by the density. In metric units, weight equals pi divided by 4, times (OD squared minus ID squared), times width, times density. In imperial units, use inches and multiply by 0.2836 lb/in³ for carbon steel.

What is a typical coil inside diameter?

Steel coils are most often wound on a 20 inch (508 mm), 24 inch (610 mm) or 30 inch (762 mm) core. Check the coil tag or your supplier, because the inside diameter strongly affects the weight for a given outside diameter.

How do I find coil weight from length and thickness?

Multiply length by width by thickness to get the volume of metal, then multiply by the density. For example, 1,000 mm wide, 1.5 mm thick steel strip weighs 11.78 kg per metre of length. This only matches the outside diameter method if the coil is wound tightly with no gaps.

What is weight per inch of width?

It is the weight of a coil for each inch of strip width, often written PIW. Multiply the PIW for your outside and inside diameter by the width in inches to get the total weight. The table above gives PIW for common steel coil sizes.

Why does the real coil weight differ from the calculated weight?

The calculator treats the coil as a solid ring of metal with 100 percent fill. Real coils have tiny air gaps between wraps, the outside diameter is measured by hand, and thickness varies within tolerance, so a coil is often slightly lighter than calculated. Use the result as a planning estimate and confirm it against the mill tag.

Can I use this for aluminium or stainless coil?

Yes. Choose stainless steel (8,000 kg/m³) or aluminium (2,700 kg/m³) in the material picker, or type your own density. The geometry is identical, so only the density changes the answer.

Need the outside diameter instead? Try the coil outer diameter calculator, or check flat sheet with the plate and sheet weight calculator.

Keep going

More handy tools

Advertisement