Advertisement

Schedule 40 and 80 Pipe Chart

Schedule 40 steel pipe

Outside diameter and wall from ASME B36.10M. Inside diameter = OD − 2 × wall. Weight is plain-end carbon steel at 7,850 kg/m³. Scroll the table sideways on a phone.

NPSOD (in)OD (mm)Wall (in)Wall (mm)ID (in)lb/ftkg/m
1/80.40510.30.0681.730.2690.250.36
1/40.54013.70.0882.240.3640.430.63
3/80.67517.10.0912.310.4930.570.85
1/20.84021.30.1092.770.6220.851.27
3/41.05026.70.1132.870.8241.131.68
11.31533.40.1333.381.0491.682.50
1-1/41.66042.20.1403.561.3802.283.39
1-1/21.90048.30.1453.681.6102.724.05
22.37560.30.1543.912.0673.665.44
2-1/22.87573.00.2035.162.4695.808.63
33.50088.90.2165.493.0687.5811.29
3-1/24.000101.60.2265.743.5489.1213.57
44.500114.30.2376.024.02610.8016.07
55.563141.30.2586.555.04714.6321.78
66.625168.30.2807.116.06518.9928.27
88.625219.10.3228.187.98128.5842.54
1010.750273.10.3659.2710.02040.5360.31
1212.750323.80.40610.3111.93853.5879.74
1414.000355.60.43811.1313.12463.5194.51
1616.000406.40.50012.7015.00082.86123.31
1818.000457.20.56214.2716.876104.78155.93
2020.000508.00.59415.0918.812123.24183.40
2424.000609.60.68817.4822.624171.48255.18

Schedule 80 steel pipe

Same outside diameters with a thicker wall, so the bore is smaller and the pipe is heavier.

NPSOD (in)OD (mm)Wall (in)Wall (mm)ID (in)lb/ftkg/m
1/80.40510.30.0952.410.2150.310.47
1/40.54013.70.1193.020.3020.540.80
3/80.67517.10.1263.200.4230.741.10
1/20.84021.30.1473.730.5461.091.62
3/41.05026.70.1543.910.7421.482.20
11.31533.40.1794.550.9572.173.24
1-1/41.66042.20.1914.851.2783.004.46
1-1/21.90048.30.2005.081.5003.645.41
22.37560.30.2185.541.9395.037.48
2-1/22.87573.00.2767.012.3237.6711.41
33.50088.90.3007.622.90010.2615.27
3-1/24.000101.60.3188.083.36412.5218.63
44.500114.30.3378.563.82615.0022.32
55.563141.30.3759.524.81320.8030.95
66.625168.30.43210.975.76128.6042.57
88.625219.10.50012.707.62543.4364.64
1010.750273.10.59415.099.56264.5095.98
1212.750323.80.68817.4811.37488.72132.04
1414.000355.60.75019.0512.500106.25158.11
1616.000406.40.84421.4414.312136.76203.52
1818.000457.20.93823.8316.124171.11254.64
2020.000508.01.03126.1917.938209.09311.16
2424.000609.61.21930.9621.562296.90441.84

NPS 22 is left out because ASME B36.10M has no Schedule 40 wall for that size. For any other OD and wall, use the round pipe weight calculator.

Advertisement

About this pipe schedule chart

Sizes and weight of carbon steel pipe from NPS 1/8 to 24: outside diameter, wall, inside diameter, pounds per foot and kilograms per metre.

This chart gives the main dimensions and the weight of carbon steel pipe in the two schedules you meet most often, Schedule 40 and Schedule 80, for nominal pipe sizes (NPS) from 1/8 inch to 24 inch. Fabricators, estimators, plumbers and buyers use it to check a wall thickness, find the bore of a pipe, or work out how much a bundle or a pipe run weighs.

The outside diameters and walls are the standard values in ASME B36.10M, the US standard for welded and seamless wrought steel pipe. The weights are calculated with the same formula as our pipe calculator and carbon steel at 7,850 kg/m³. Published tables use slightly different constants and rounding, so their weight can differ from this chart in the second decimal place.

How to calculate steel pipe weight per foot

A pipe is a hollow cylinder. Its cross-section area is π × wall × (OD − wall), and the weight per unit length is that area times the density.

Metric formula

Weight (kg/m) = 0.02466 × (OD − wall) × wall, with OD and wall in mm

The 0.02466 is π × 7,850 ÷ 1,000,000, the steel density turned into a factor for millimetres and metres.

Imperial formula

Weight (lb/ft) = 10.69 × (OD − wall) × wall, with OD and wall in inches

The 10.69 is π × 12 × 0.2836, where 0.2836 lb/in³ is the density of carbon steel. Some references print 10.68 because they use a slightly lower density.

Worked example 1: metric

NPS 4 Schedule 40 pipe has an outside diameter of 114.3 mm and a wall of 6.02 mm. Weight = 0.02466 × (114.3 − 6.02) × 6.02 = 16.07 kg/m, which matches the chart. A 6 m length weighs about 96 kg.

Worked example 2: imperial

NPS 6 Schedule 80 pipe has an outside diameter of 6.625 in and a wall of 0.432 in. Weight = 10.69 × (6.625 − 0.432) × 0.432 = 28.60 lb/ft. A 21 ft random length weighs about 21 × 28.60 = 600.7 lb.

Density used

The chart uses carbon steel at 7,850 kg/m³ (0.2836 lb/in³). Stainless steel pipe made to ASME B36.19M uses its own schedules (5S, 10S, 40S, 80S); where the wall matches, it weighs about 1.9 percent more at 8,000 kg/m³. The metal density chart lists other metals.

Reading pipe sizes

The nominal size is a name, not a measurement. From NPS 1/8 to NPS 12 the outside diameter is larger than the nominal size: NPS 2 pipe is 2.375 in outside. From NPS 14 up, the outside diameter equals the nominal size. Within one nominal size every schedule shares the same outside diameter, which is why fittings fit; only the wall, and so the bore, changes.

Schedule 40 is the same as standard wall (STD) up to NPS 10. From NPS 12 up, STD stays at 0.375 in while Schedule 40 gets thicker. In the same way, Schedule 80 equals extra strong (XS) up to NPS 8, and is thicker than XS from NPS 10 up.

The weights in the chart are for plain-end pipe. Threaded and coupled pipe is a little heavier because of the coupling, and galvanized pipe carries extra zinc. Pipe is also made to a wall tolerance, so the actual weight of a bundle can be a few percent different from the chart. For a quote or a lift plan, add a margin or check the mill certificate.

To weigh a pipe run, multiply the lb/ft value by the total length in feet. For example, 200 ft of NPS 3 Schedule 40 pipe weighs about 200 × 7.58 = 1,517 lb, empty. The water inside is extra: work out the bore area from the ID column if you need the filled weight.

Frequently asked questions

How much does 2 inch schedule 40 steel pipe weigh per foot?

NPS 2 Schedule 40 carbon steel pipe weighs about 3.66 lb per foot, or 5.44 kg per metre. It has a 2.375 inch outside diameter and a 0.154 inch wall. Many tables print 3.65 lb per foot because they use a slightly different density.

What is the difference between schedule 40 and schedule 80 pipe?

Both have the same outside diameter, but Schedule 80 has a thicker wall, a smaller inside diameter and more weight. NPS 2 Schedule 80 has a 0.218 inch wall and weighs about 5.03 lb per foot, about 37 percent more than Schedule 40.

What is the inside diameter of 4 inch schedule 40 pipe?

NPS 4 Schedule 40 pipe has a 4.500 inch outside diameter and a 0.237 inch wall, so the inside diameter is 4.500 minus twice 0.237, which is 4.026 inches.

Is schedule 40 the same as standard wall pipe?

Up to NPS 10 they are the same. From NPS 12 and larger, standard wall stays at 0.375 inch while Schedule 40 is thicker, for example 0.406 inch for NPS 12.

Why does this chart differ slightly from other pipe weight tables?

Weight tables use different steel densities and rounding. This chart uses 7,850 kg/m3 and the exact ASME outside diameters and walls, so values can differ from other tables in the second decimal place. The dimensions themselves are the standard values.

Weigh any pipe size with the round pipe weight calculator, or use the rectangular tube weight calculator for box section.

Keep going

More handy tools

Advertisement