Rectangular and Square Tube Weight Calculator
Weight of hollow rectangular or square tube from outside size, wall thickness and length.
Weight
Live 3D preview
How it’s calculated
Weight = (W × H − (W − 2T) × (H − 2T)) × Length × Density
- Every size is converted to millimetres first, so each box can use its own unit.
- Outer area minus inner area gives the metal area; × length × density gives the weight.
- With more than one piece, the total is the weight of one piece × the number of pieces.
How it works
Weight is (outer area - inner area) x length x density. For square tube, enter the same width and height.
Rectangular and square tube weight: how it works
This tube weight calculator works out how heavy a length of hollow rectangular or square steel tube is from its outside width, outside height, wall thickness and length. Buyers, fabricators and estimators use it to price a job, check a delivery against a packing list, plan lifting and freight, or compare one tube size against another. The result is shown in both kilograms and pounds.
The default material is carbon steel at 7,850 kg/m³ (0.2836 lb/in³). Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density. You can enter sizes in millimetres or inches and the length in millimetres, centimetres, metres, inches or feet, and the result updates as you type. For square tube, enter the same number for width and height.
How to calculate rectangular tube weight
A hollow tube is a big rectangle with a smaller rectangle cut out of its middle. The steel cross-section is the difference between the two, and the weight is that area multiplied by length and by the density of the metal.
Metric formula
Weight (kg) = [W × H − (W − 2T) × (H − 2T)] × Length (m) × Density (kg/m³) ÷ 1,000,000
Here W is the outside width, H the outside height and T the wall thickness, all in millimetres. For carbon steel this reduces to the area in mm² times 0.00785, which gives the weight in kg per metre.
Imperial formula
Weight (lb) = [W × H − (W − 2T) × (H − 2T)] × Length (in) × 0.2836
Here W, H and T are in inches. If you prefer feet for length, multiply the area in in² by 3.403 to get pounds per foot, then multiply by the number of feet.
Worked example 1: metric
A carbon steel tube is 100 mm × 50 mm with a 5 mm wall and is 6 m long.
Area = 100 × 50 − (100 − 2 × 5) × (50 − 2 × 5) = 5,000 − 3,600 = 1,400 mm². Weight per metre = 1,400 × 0.00785 = 10.99 kg. For 6 m: 65.94 kg, which is about 145.4 lb.
Worked example 2: imperial
A carbon steel square tube is 2 in × 2 in with a 1/4 inch (0.25 in) wall and is 20 ft (240 in) long.
Area = 2 × 2 − (2 − 2 × 0.25) × (2 − 2 × 0.25) = 4 − 2.25 = 1.75 in². Volume = 1.75 × 240 = 420 in³. Weight = 420 × 0.2836 = 119.1 lb, which is about 54.0 kg (5.96 lb per foot).
Corner radius and real tube weight
This calculator uses sharp corners: it does not subtract any material for the rounded outside corners or add any for the rounded inside corners. Real hot-finished and cold-formed tube has radiused corners, and because the outside radius removes more steel than the inside radius puts back, real tube is slightly lighter than the calculated figure.
How much lighter depends on the corner radius, which varies with the product standard and the manufacturer. As a rough guide, if the outside radius is about twice the wall thickness and the inside radius about equal to it, the sharp-corner figure is higher by about 4.6 percent for the 100 × 50 × 5 mm example and about 9.2 percent for the 2 × 2 × 1/4 in example. Thicker walls give a bigger difference. Wall thickness tolerance and density also move real weight by a few percent, so treat the result as an estimate and use your supplier's published weight per foot or per metre for ordering.
Weight per metre and per foot for common sizes
These are carbon steel at 7,850 kg/m³, calculated with sharp corners exactly as the calculator does. Sizes are width × height × wall.
| Size (mm) | kg per metre | lb per foot |
|---|---|---|
| 20 × 20 × 2 | 1.13 | 0.76 |
| 25 × 25 × 2.5 | 1.77 | 1.19 |
| 40 × 40 × 3 | 3.49 | 2.34 |
| 50 × 50 × 3 | 4.43 | 2.98 |
| 50 × 50 × 5 | 7.07 | 4.75 |
| 60 × 40 × 3 | 4.43 | 2.98 |
| 80 × 40 × 4 | 7.03 | 4.73 |
| 100 × 50 × 5 | 10.99 | 7.38 |
| 100 × 100 × 5 | 14.91 | 10.02 |
| 120 × 80 × 5 | 14.91 | 10.02 |
| 150 × 100 × 6 | 22.42 | 15.07 |
| 200 × 100 × 8 | 35.67 | 23.97 |
The same idea for common fractional-inch sizes used in the US:
| Size (in) | lb per foot | kg per metre |
|---|---|---|
| 1 × 1 × 1/8 | 1.49 | 2.22 |
| 1-1/2 × 1-1/2 × 1/8 | 2.34 | 3.48 |
| 2 × 2 × 1/8 | 3.19 | 4.75 |
| 2 × 2 × 1/4 | 5.96 | 8.86 |
| 3 × 2 × 3/16 | 5.90 | 8.78 |
| 3 × 3 × 1/4 | 9.36 | 13.93 |
| 4 × 2 × 1/4 | 9.36 | 13.93 |
| 4 × 4 × 1/4 | 12.76 | 18.99 |
| 6 × 4 × 1/4 | 16.17 | 24.06 |
| 6 × 6 × 3/8 | 28.71 | 42.73 |
Example: 40 ft of 3 × 3 × 1/4 inch tube weighs about 40 × 9.36 = 374.4 lb.
Frequently asked questions
How do I calculate the weight of rectangular steel tube?
Subtract the inner rectangle from the outer rectangle to get the steel cross-section area, then multiply by length and density. In metric units, weight in kg per metre equals the area in mm² times 0.00785. In imperial units, weight in lb per foot equals the area in in² times 3.403.
Does the calculator account for rounded corners?
No. It treats the tube as having sharp square corners, so the result is slightly higher than the weight of real tube, which has rounded corners. The difference depends on the wall thickness and the corner radius, and it ranges from a few percent on thin walls to around ten percent on thick walls.
How do I calculate square tube weight?
Enter the same number for width and height. For example, 2 in by 2 in tube with a 1/4 in wall has a steel area of 1.75 in² and weighs about 5.96 lb per foot.
What wall thickness limit does the calculator allow?
The wall must be less than half of the smaller outside side. At exactly half, the tube would be solid bar with no hole, so the calculator asks you to reduce the wall thickness.
How accurate is the calculated weight?
It is a planning estimate. Real tube has rounded corners, a wall thickness that varies within the product standard, and a density that depends on the grade. Always confirm against your supplier's data before ordering or shipping.
Can I use it for stainless steel or aluminium tube?
Yes. Choose stainless steel (8,000 kg/m³) or aluminium (2,700 kg/m³) in the material picker, or type your own density. The same area, length and density formula applies to any hollow rectangular section.
Working with other shapes? See the round pipe weight calculator and the flat bar weight calculator.