Advertisement

Flat Bar Weight Calculator

Weight of a flat bar from width, thickness and length, with weight per metre and totals for several bars.

Weight

0 kg

Live 3D preview

Advertisement

How it’s calculated

Weight = Width × Thickness × Length × Density

  1. Every size is converted to millimetres first, so each box can use its own unit.
  2. Width × thickness gives the cross-section area; × length × density gives the weight.
  3. With more than one piece, the total is the weight of one piece × the number of pieces.

How it works

Weight is width x thickness x length x density.

Results are estimates for planning; real products vary with grade, tolerances and coatings. Always check against your supplier’s data.

Flat bar weight: how it works

This flat bar weight calculator gives the weight of a rectangular solid bar from its width, thickness and length. It is handy when you are ordering flat bar for brackets, base plates, frames or gates, checking a delivery, or working out freight. Enter sizes in millimetres, centimetres, metres, inches or feet, and the result is shown in kilograms and pounds, with the weight per metre and the total for several bars.

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density for any other metal.

How to calculate flat bar weight

A flat bar has a rectangular cross-section, so its weight is the cross-section area times the length times the density of the metal.

Metric formula

Weight (kg) = Width (mm) × Thickness (mm) × Length (m) × Density (kg/m³) ÷ 1,000,000

For carbon steel the density term works out to 7.85, so weight per metre in kg is width in mm times thickness in mm times 0.00785.

Imperial formula

Weight (lb) = Width (in) × Thickness (in) × Length (in) × 0.2836

The figure 0.2836 is the density of carbon steel in lb/in³. Working in feet for length, Weight (lb) = Width (in) × Thickness (in) × Length (ft) × 3.403, because 12 × 0.2836 = 3.403.

Worked example 1: metric

A carbon steel flat bar is 50 mm wide, 10 mm thick and 3 m long.

Weight = 50 × 10 × 3 × 7,850 ÷ 1,000,000 = 11.78 kg, which is about 26.0 lb (3.93 kg per metre).

Worked example 2: imperial

A steel flat bar is 2 in wide, 1/4 in (0.25 in) thick and 10 ft (120 in) long.

Volume = 2 × 0.25 × 120 = 60 in³. Weight = 60 × 0.2836 = 17.02 lb, which is about 7.72 kg (1.70 lb per foot).

Density used for each material

The material changes the result only through its density. These are the values built into the calculator. They are typical figures, so use your supplier's number if you have it. The lb/in³ column is the kg/m³ value converted.

Materialkg/m³lb/in³
Carbon steel7,8500.2836
Stainless steel8,0000.2890
Aluminium2,7000.0975

Flat bar weight per metre and per foot

Multiply the figure for your size by the length to get the bar weight. Metric sizes are width × thickness in mm, with steel at 7,850, stainless at 8,000 and aluminium at 2,700 kg/m³.

Size (mm)Steel kg/mAluminium kg/mStainless kg/mSteel lb/ft
20 × 30.470.160.480.32
25 × 50.980.341.000.66
30 × 51.180.411.200.79
40 × 51.570.541.601.05
50 × 51.960.682.001.32
50 × 103.921.354.002.64
75 × 105.892.026.003.96
100 × 107.852.708.005.27
100 × 2015.705.4016.0010.55
150 × 1011.784.0512.007.91

Common US sizes are given as thickness × width in inches. These are carbon steel at 0.2836 lb/in³.

Size (in)Steel lb/ftSteel kg/mAluminium lb/ft
1/8 × 10.430.630.15
1/8 × 20.851.270.29
1/4 × 10.851.270.29
1/4 × 21.702.530.59
1/4 × 32.553.800.88
3/8 × 22.553.800.88
3/8 × 45.107.601.76
1/2 × 23.405.061.17
1/2 × 46.8110.132.34
3/4 × 37.6611.402.63
1 × 26.8110.132.34
1 × 413.6120.264.68

Example: a 20 ft length of 1/4 × 2 inch steel flat bar weighs about 20 × 1.70 = 34.0 lb.

Frequently asked questions

How do I calculate the weight of a flat bar?

Multiply width by thickness to get the cross-section area, then multiply by the length and the density of the metal. In metric units, weight per metre in kg equals width in mm times thickness in mm times 0.00785 for carbon steel. In imperial units, weight per foot in lb equals width in inches times thickness in inches times 3.403.

How much does a flat bar of steel weigh per foot?

It depends on the size. A 1/4 inch by 2 inch steel flat bar weighs about 1.70 lb per foot, and a 1/2 inch by 4 inch bar weighs about 6.81 lb per foot.

What density should I use for flat bar?

Carbon steel is normally calculated at 7,850 kg/m³, which is 0.2836 lb/in³. Stainless steel is about 8,000 kg/m³ and aluminium about 2,700 kg/m³. You can also type your own density in the calculator.

Can I use this calculator for aluminium or stainless flat bar?

Yes. Pick aluminium or stainless steel in the material picker, or type your own density. The width, thickness and length formula is the same for every metal.

Why does my supplier's weight differ from the calculated weight?

The calculator uses nominal sizes and a standard density. Real flat bar has rolling tolerances on width and thickness, and grade and surface condition change the weight slightly. Treat the result as a planning estimate and confirm it against your supplier's data.

How do I find the total weight of several bars?

Calculate the weight of one bar, then multiply by the number of bars. The calculator does this for you when you enter a quantity.

Other shapes: see the plate and sheet weight calculator and the square bar weight calculator.

Keep going

More handy tools

Advertisement