Advertisement

Square Bar Weight Calculator

Weight of a solid square bar from side and length, with weight per metre and totals for several bars.

Weight

0 kg

Live 3D preview

Advertisement

How it’s calculated

Weight = Side² × Length × Density

  1. Every size is converted to millimetres first, so each box can use its own unit.
  2. Side × side gives the cross-section area; × length × density gives the weight.
  3. With more than one piece, the total is the weight of one piece × the number of pieces.

How it works

Weight is side x side x length x density.

Results are estimates for planning; real products vary with grade, tolerances and coatings. Always check against your supplier’s data.

Square bar weight: how it works

This square bar weight calculator gives the weight of a solid square bar from the length of its side and its length. It is useful for pricing bar for gates, railings, frames and machined parts, checking a delivery against a packing list, or working out freight. Enter sizes in millimetres, centimetres, metres, inches or feet, and the result is shown in kilograms and pounds, with the weight per metre and the total for several bars.

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density for any other metal.

How to calculate square bar weight

A square bar has a square cross-section, so its weight is the side squared times the length times the density of the metal.

Metric formula

Weight (kg) = Side (mm)² × Length (m) × Density (kg/m³) ÷ 1,000,000

For carbon steel this simplifies to weight per metre in kg = side in mm squared × 0.00785.

Imperial formula

Weight (lb) = Side (in)² × Length (in) × 0.2836

Working in feet for length, Weight (lb) = Side (in)² × Length (ft) × 3.403, because 12 × 0.2836 = 3.403.

Worked example 1: metric

A carbon steel square bar is 40 mm on each side and 3 m long.

Weight = 40² × 3 × 7,850 ÷ 1,000,000 = 37.68 kg, which is about 83.1 lb (12.56 kg per metre).

Worked example 2: imperial

A steel square bar is 3/4 in (0.75 in) on each side and 10 ft (120 in) long.

Volume = 0.75² × 120 = 67.5 in³. Weight = 67.5 × 0.2836 = 19.14 lb, which is about 8.68 kg (1.91 lb per foot).

Density used for each material

The material changes the result only through its density. These are the values built into the calculator. They are typical figures, so use your supplier's number if you have it. The lb/in³ column is the kg/m³ value converted.

Materialkg/m³lb/in³
Carbon steel7,8500.2836
Stainless steel8,0000.2890
Aluminium2,7000.0975

Square bar weight per metre and per foot

Multiply the figure for your side length by the bar length to get the weight. Metric sides are in mm, with steel at 7,850, stainless at 8,000 and aluminium at 2,700 kg/m³.

Side (mm)Steel kg/mAluminium kg/mStainless kg/mSteel lb/ft
60.2830.0970.2880.190
80.5020.1730.5120.338
100.7850.2700.8000.527
121.1300.3891.1520.760
162.0100.6912.0481.350
203.1401.0803.2002.110
254.9061.6885.0003.297
328.0382.7658.1925.402
4012.5604.32012.8008.440
5019.6256.75020.00013.187
7544.15615.18845.00029.672
10078.50027.00080.00052.750

Common US sizes in inches, in carbon steel at 0.2836 lb/in³:

Side (in)Side (mm)Steel lb/ftSteel kg/mAluminium lb/ft
1/46.30.2130.3170.073
3/89.50.4790.7120.165
1/212.70.8511.2660.293
5/815.91.3291.9780.457
3/419.01.9142.8490.658
125.43.4035.0651.171
1-1/431.85.3187.9131.829
1-1/238.17.65711.3952.634
250.813.61320.2584.682
376.230.62945.58110.535
4101.654.45181.03218.728

Example: a 20 ft length of 1/2 inch steel square bar weighs about 20 × 0.851 = 17.0 lb.

Frequently asked questions

How do I calculate the weight of a square bar?

Square the side length to get the cross-section area, then multiply by the length and the density. In metric units, weight per metre in kg equals side in mm squared times 0.00785 for carbon steel. In imperial units, weight per foot in lb equals side in inches squared times 3.403.

How much does a steel square bar weigh per foot?

It depends on the size. A 1 inch steel square bar weighs about 3.40 lb per foot, and a 2 inch bar weighs about 13.61 lb per foot.

What density should I use for square bar?

Carbon steel is normally calculated at 7,850 kg/m³, which is 0.2836 lb/in³. Stainless steel is about 8,000 kg/m³ and aluminium about 2,700 kg/m³. You can also type your own density in the calculator.

Is a square bar heavier than a round bar of the same size?

Yes. A square bar with a side equal to the diameter of a round bar has about 27 percent more cross-section area, so it weighs about 27 percent more for the same length.

Why does my supplier's weight differ from the calculated weight?

The calculator uses the nominal side and a standard density. Real bar has size tolerances and slightly rounded corners, and grade changes the weight slightly. Treat the result as a planning estimate and confirm it against your supplier's data.

How do I find the total weight of several bars?

Calculate the weight of one bar, then multiply by the number of bars. The calculator does this for you when you enter a quantity.

Other shapes: see the round bar weight calculator and the flat bar weight calculator.

Keep going

More handy tools

Advertisement