Advertisement

Plate and Sheet Weight Calculator

Weight of a flat plate or sheet from length, width and thickness, for one piece or a whole stack.

Weight

0 kg

Live 3D preview

Advertisement

How it’s calculated

Weight = Length × Width × Thickness × Density

  1. Every size is converted to millimetres first, so each box can use its own unit.
  2. Length × width × thickness gives the volume; × density gives the weight.
  3. With more than one piece, the total is the weight of one piece × the number of pieces.

How it works

For example, a 1000 × 1000 × 10 mm steel plate at 7850 kg/m³ weighs 78.5 kg.

Need a sheet by gauge number? Use the sheet metal gauge chart.

Results are estimates for planning; real products vary with grade, tolerances and coatings. Always check against your supplier’s data.

Steel plate weight: how it works

This plate weight calculator works out how heavy a flat steel plate or sheet is from its length, width and thickness. It is useful when you are pricing a job, checking a delivery against a packing list, choosing a crane or forklift, or working out freight. You can enter sizes in millimetres, centimetres, metres, inches or feet, and the result is shown in both kilograms and pounds.

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density for any other metal.

How to calculate plate weight

Every flat plate is a rectangular block, so its weight is its volume multiplied by the density of the metal.

Metric formula

Weight (kg) = Length (m) × Width (m) × Thickness (mm) × Density (kg/m³) ÷ 1,000

For carbon steel the density term works out to 7.85, so every square metre of plate weighs 7.85 kg for each millimetre of thickness.

Imperial formula

Weight (lb) = Length (in) × Width (in) × Thickness (in) × 0.2836

The figure 0.2836 is the density of carbon steel in lb/in³. If you prefer to work in feet for length and width, a square foot of steel that is one inch thick weighs about 40.84 lb, so Weight (lb) = Length (ft) × Width (ft) × Thickness (in) × 40.84.

Worked example 1: metric

A carbon steel sheet measures 2.4 m × 1.2 m and is 6 mm thick.

Weight = 2.4 × 1.2 × 6 × 7,850 ÷ 1,000 = 135.65 kg, which is about 299.1 lb.

Worked example 2: imperial

A standard 4 ft × 8 ft plate (48 in × 96 in) is 1/4 inch (0.25 in) thick.

Volume = 48 × 96 × 0.25 = 1,152 in³. Weight = 1,152 × 0.2836 = 326.7 lb, which is about 148.2 kg.

Density of common metals

The material is the only thing that changes the formula, and it changes it through density. These are typical values. Published figures vary slightly between sources and grades, so use your supplier's number when you have it. The lb/in³ column is the kg/m³ value converted.

Materialkg/m³lb/in³
Carbon steel7,8500.2836
Stainless steel 3048,0000.2890
Stainless steel 3168,0000.2890
Aluminium2,7000.0975
Copper8,9600.3237
Brass8,5000.3071
Cast iron7,2000.2601
Titanium4,5000.1626

The calculator's built-in materials are carbon steel (7,850), stainless steel (8,000) and aluminium (2,700). Stainless grades are often quoted anywhere from about 7,900 to 8,000 kg/m³, so a different figure in the density box will move the result by around one percent.

Quick weight per area by thickness

If you know the area of a plate, multiply it by the figure below for its thickness. Metric thicknesses first, with steel at 7,850 kg/m³ and aluminium at 2,700 kg/m³.

Thickness (mm)Thickness (in)Steel kg/m²Steel lb/ft²Aluminium kg/m²Aluminium lb/ft²
10.0397.851.612.700.55
20.07915.703.225.401.11
30.11823.554.828.101.66
50.19739.258.0413.502.77
60.23647.109.6516.203.32
80.31562.8012.8621.604.42
100.39478.5016.0827.005.53
120.47294.2019.2932.406.64
160.630125.6025.7243.208.85
200.787157.0032.1654.0011.06
250.984196.2540.2067.5013.83
501.969392.5080.39135.0027.65

The same idea for common fractional-inch plate thicknesses in carbon steel:

Thickness (in)Thickness (mm)Steel lb/ft²Steel kg/m²
1/83.25.1024.92
3/164.87.6637.39
1/46.310.2149.85
3/89.515.3174.77
1/212.720.4299.69
5/815.925.52124.62
3/419.030.63149.54
125.440.84199.39

Example: 30 square feet of 3/8 inch steel plate weighs about 30 × 15.31 = 459.4 lb.

Frequently asked questions

How do I calculate the weight of a steel plate?

Multiply length by width by thickness to get the volume, then multiply by the density of the steel. In metric units, weight in kg equals length in metres times width in metres times thickness in millimetres times 7.85. In imperial units, weight in lb equals length in inches times width in inches times thickness in inches times 0.2836.

What density should I use for steel plate?

Carbon steel is normally calculated at 7,850 kg/m³, which is 0.2836 lb/in³. This calculator starts with that value and lets you type a different density if your grade or supplier data calls for it.

How much does a square foot of steel plate weigh?

A square foot of steel plate that is one inch thick weighs about 40.84 lb. Scale that by thickness: a 1/4 inch plate weighs about 10.21 lb per square foot, and a 1/2 inch plate about 20.42 lb per square foot.

Why does my supplier's weight differ from the calculated weight?

The calculator uses nominal sizes and a standard density. Mill plate can be a little over or under its nominal thickness, and grade, coatings and edge conditions also change the real weight. Treat the result as a planning estimate and confirm it against your supplier's data.

Can I use this calculator for stainless steel or aluminium sheet?

Yes. Choose stainless steel (8,000 kg/m³) or aluminium (2,700 kg/m³) in the material picker, or type your own density. The same length, width and thickness formula applies to any flat sheet or plate.

How do I find the weight of several plates at once?

Calculate the weight of one piece, then multiply by the number of pieces. The calculator does this for you when you enter a quantity.

Working with other shapes or need a gauge number? See the sheet metal gauge chart and the flat bar weight calculator.

Keep going

More handy tools

Advertisement