Advertisement

Round Pipe Weight Calculator

Weight of a round pipe from outside diameter, wall thickness and length, plus the inside diameter.

Weight

0 kg

Live 3D preview

Advertisement

How it’s calculated

Weight = π × Wall × (OD − Wall) × Length × Density

  1. Every size is converted to millimetres first, so each box can use its own unit.
  2. The ring area is π × wall × (OD − wall); × length × density gives the weight.
  3. With more than one piece, the total is the weight of one piece × the number of pieces.

How it works

Weight is pi x wall x (OD - wall) x length x density.

The inside diameter is the OD minus two wall thicknesses.

Results are estimates for planning; real products vary with grade, tolerances and coatings. Always check against your supplier’s data.

Round pipe weight: how it works

This round pipe weight calculator gives the weight of a hollow round pipe from its outside diameter, wall thickness and length. It is useful for estimating pipe runs, handrails, structural posts and shipping loads, and for checking a delivery against a packing list. Enter sizes in millimetres, centimetres, metres, inches or feet, and the result is shown in kilograms and pounds, with the weight per metre, the total for several pieces and the inside diameter.

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminium (2,700 kg/m³) are one click away, and you can type your own density for any other metal.

How to calculate round pipe weight

A pipe is a ring-shaped cross-section: the outer circle minus the empty inner circle. That area equals π × wall × (OD − wall), which is the same as π ÷ 4 × (OD² − ID²). Multiply it by the length and the density to get the weight.

Metric formula

Weight (kg) = π × Wall (mm) × (OD (mm) − Wall (mm)) × Length (m) × Density (kg/m³) ÷ 1,000,000

The inside diameter is ID = OD − 2 × wall. The calculator uses ideal dimensions, so it ignores weld seams and any coating.

Imperial formula

Weight (lb) = π × Wall (in) × (OD (in) − Wall (in)) × Length (in) × 0.2836

Working in feet for length, Weight (lb) = π × Wall × (OD − Wall) × Length (ft) × 3.403, with OD and wall in inches, because 12 × 0.2836 = 3.403.

Worked example 1: metric

A carbon steel pipe has an outside diameter of 100 mm, a wall of 5 mm and a length of 6 m.

Weight = π × 5 × (100 − 5) × 6 × 7,850 ÷ 1,000,000 = 70.29 kg, which is about 155.0 lb (11.71 kg per metre). The inside diameter is 90 mm.

Worked example 2: imperial

A 2 inch standard pipe has an outside diameter of 2.375 in and a wall of 0.154 in (Schedule 40). The length is 20 ft.

Area = π × 0.154 × (2.375 − 0.154) = 1.075 in². Weight per foot = 1.075 × 12 × 0.2836 = 3.66 lb, so 20 ft weighs 73.1 lb, which is about 33.2 kg.

Density used for each material

The material changes the result only through its density. These are the values built into the calculator. They are typical figures, so use your supplier's number if you have it. The lb/in³ column is the kg/m³ value converted.

Materialkg/m³lb/in³
Carbon steel7,8500.2836
Stainless steel8,0000.2890
Aluminium2,7000.0975

Pipe weight per metre and per foot

Multiply the figure for your size by the length to get the pipe weight. Sizes are outside diameter × wall in mm, typical of common metric pipe sizes, with steel at 7,850, stainless at 8,000 and aluminium at 2,700 kg/m³.

OD × wall (mm)ID (mm)Steel kg/mAluminium kg/mStainless kg/mSteel lb/ft
21.3 × 2.616.11.200.411.220.81
26.9 × 2.621.71.560.541.591.05
33.7 × 3.227.32.410.832.451.62
42.4 × 3.236.03.091.063.152.08
48.3 × 3.241.93.561.223.632.39
60.3 × 3.653.15.031.735.133.38
76.1 × 3.668.96.442.216.564.33
88.9 × 4.080.98.382.888.545.63
114.3 × 4.5105.312.194.1912.428.19
139.7 × 5.0129.716.615.7116.9311.16
168.3 × 6.0156.324.028.2624.4716.14
219.1 × 8.0203.141.6514.3242.4427.99

Standard US pipe sizes (Schedule 40)

In the US, pipe is sold by nominal pipe size (NPS), and the actual outside diameter is larger than the name. These are Schedule 40 dimensions from ASME B36.10. The calculated columns use the calculator formula with carbon steel at 0.2836 lb/in³, and the last column is the published plain-end weight.

NPS (in)OD (in)Wall (in)Calculated lb/ftCalculated kg/mPublished lb/ft
1/20.8400.1090.851.270.85
11.3150.1331.682.501.68
22.3750.1543.665.443.65
33.5000.2167.5811.297.58
44.5000.23710.8016.0710.79
66.6250.28018.9928.2718.97

The small differences are normal. Published weights are rounded and mills allow a wall tolerance, so real pipe can weigh a little more or less than either figure. Use your supplier's data for ordering.

Frequently asked questions

How do I calculate the weight of a pipe?

Find the cross-section area of the wall as pi times wall thickness times outside diameter minus wall thickness, then multiply by the length and the density. In metric units, weight in kg equals that area in square millimetres times the length in metres times the density in kg/m³, divided by 1,000,000. In imperial units, use inches and 0.2836 lb/in³.

How much does 2 inch Schedule 40 steel pipe weigh per foot?

The published weight is about 3.65 lb per foot for a pipe with an outside diameter of 2.375 inches and a wall of 0.154 inches. This calculator gives 3.66 lb per foot for the same size because it uses the exact formula and a standard density.

What density should I use for pipe?

Carbon steel is normally calculated at 7,850 kg/m³, which is 0.2836 lb/in³. Stainless steel is about 8,000 kg/m³ and aluminium about 2,700 kg/m³. You can also type your own density in the calculator.

Does this include the weight of water in the pipe?

No. The result is the weight of the empty pipe wall only. The contents, insulation, coatings and fittings would be added separately.

Why does my supplier's weight differ from the calculated weight?

The calculator uses nominal sizes and a standard density. Real pipe has tolerances on wall thickness and outside diameter, and welded pipe has a seam. Treat the result as a planning estimate and confirm it against your supplier's data.

Can I enter the inside diameter instead?

Enter the outside diameter and the wall thickness. If you only know the inside diameter, add twice the wall thickness to get the outside diameter. The calculator shows the inside diameter as a check.

For hollow sections, see the rectangular tube weight calculator. For solid bar, see the round bar weight calculator.

Keep going

More handy tools

Advertisement