Advertisement

Length Converter

Convert between millimetres, centimetres, metres, inches and feet. Every unit updates as you type.

Convert

Result
-
The value is in

All results

Every unit at once

Tap the copy button on any tile to copy that value.

Advertisement

About this converter

One inch is exactly 25.4 millimetres, and one foot is 12 inches (304.8 mm).

Type a value, choose the unit it is in, and all the other units update as you type.

Tips

Use the swap button to flip the two units: the result becomes the new value.

Figures are rounded for display. Exact conversion factors are used in the maths.

Length conversion for steel work

This length converter changes a measurement between millimetres, centimetres, metres, inches and feet. Steel is specified in both systems: US mills quote plate thickness in inches and lengths in feet, while the rest of the world works in millimetres and metres. Anyone who buys, designs or fabricates across that line needs quick, exact conversions.

Type a value, pick the unit it is in, and every other unit updates at once. The conversions use exact factors and only the displayed result is rounded.

The units and exact conversion factors

Everything is defined from the inch, which since 1959 has been exactly 25.4 millimetres. All other factors follow from that.

UnitIn millimetresIn inches
1 millimetre (mm)10.039370
1 centimetre (cm)100.393701
1 metre (m)1,00039.37008
1 inch (in)25.4 (exact)1
1 foot (ft)304.8 (exact)12 (exact)

So 1 m is about 3.2808 ft, and 1 ft is exactly 0.3048 m.

How to convert between metric and imperial

Inches to millimetres

Millimetres = Inches × 25.4

Millimetres to inches

Inches = Millimetres ÷ 25.4

Feet to metres

Metres = Feet × 0.3048

Worked example 1: a 3/8 inch plate is 0.375 in × 25.4 = 9.525 mm. Worked example 2: a 2,400 mm bar is 2,400 ÷ 25.4 = 94.49 in, or 7.874 ft.

Common fractions of an inch in millimetres

Fraction (in)Decimal (in)Millimetres
1/160.06251.587
1/80.12503.175
1/40.25006.350
3/80.37509.525
1/20.500012.700
5/80.625015.875
3/40.750019.050
11.000025.400

These are the thicknesses you most often meet on US plate, bar and tube. A nominal 1/4 inch plate is 6.35 mm, which metric mills often supply as 6 mm.

Feet to metres and millimetres

FeetMetresMillimetres
10.305304.8
20.610609.6
41.2191,219.2
82.4382,438.4
103.0483,048.0
206.0966,096.0
4012.19212,192.0

Steel is often stocked in 20 ft and 40 ft lengths in the US and 6 m and 12 m lengths elsewhere. They are close, but not the same: 20 ft is 6.096 m, a little longer than 6 m, and 6 m is 19.69 ft.

Millimetres to inches

MillimetresInchesFeet
10.03940.0033
50.19690.0164
100.39370.0328
250.98430.0820
501.96850.1640
1003.93700.3281
50019.68501.6404
1,00039.37013.2808
2,40094.48827.8740
6,000236.220519.6850

Where this matters in steel

Plate and sheet thickness is quoted in inches, gauge numbers or millimetres depending on the country, so converting is the first step before comparing offers. Sheet sizes also differ: a 4 ft by 8 ft sheet is 1,219.2 mm by 2,438.4 mm, while metric stock is often 1,250 mm by 2,500 mm. If you need weight rather than length, the plate weight calculator accepts both unit systems directly.

Frequently asked questions

How many millimetres are in an inch?

Exactly 25.4 millimetres. This is the international definition, so there is no rounding in the factor. To convert inches to millimetres, multiply by 25.4. To convert millimetres to inches, divide by 25.4.

How do I convert feet to metres?

One foot is exactly 12 inches, which is 304.8 mm or 0.3048 m. Multiply feet by 0.3048 to get metres. For example, a 20 ft length is 6.096 m and a 40 ft length is 12.192 m.

What is the size of a 4 by 8 foot steel sheet in millimetres?

A 4 ft by 8 ft sheet is 48 in by 96 in, which is 1,219.2 mm by 2,438.4 mm. Metric sheets are commonly sold as 1,250 mm by 2,500 mm, which is slightly larger.

How do I convert a fraction of an inch to millimetres?

Divide the top number by the bottom number to get a decimal inch, then multiply by 25.4. For example, 3/8 in is 0.375 in, and 0.375 times 25.4 is 9.525 mm.

Is the converter rounded?

Only the displayed numbers are rounded. The converter uses the exact factors in its calculation, so converting one way and back returns your starting value.

Also see the weight converter and the pressure and stress converter.

Keep going

More handy tools

Advertisement