Advertisement

Steel Coil Weight Calculator

1Coil size

Default unit
Show weight in

The default unit sets every box. Tap the unit inside any box to change just that one.

Common:

2Material

kg/m³

Coil weight

0 kg

Pounds-
Metric tonnes-
MaterialSteel
Coil length Enter thickness to see length

Live 3D preview

OD - ID - Width -
Advertisement

How it’s calculated

Weight = π ÷ 4 × (OD² − ID²) × Width × Density

Length = π × (OD² − ID²) ÷ (4 × Thickness)

  1. Enter your sizes to see the working here.

How it works

A coil is a hollow cylinder of metal. The calculator finds the area of the ring between the inside and outside diameters, multiplies it by the coil width, then by the material density.

Pick a material or type your own density if you have a grade-specific figure.

The coil is treated as a solid hollow cylinder (100% fill). Results are estimates for planning; always check against your supplier’s data.

Steel coil calculator: what it works out

This steel coil calculator gives coil weight, strip length and weight per inch of width (PIW) from width, inside diameter and outside diameter. Metric or imperial, with the answer updating as you type.

This steel coil weight calculator finds how heavy a coil of steel, stainless steel or aluminum strip is from its width, inside diameter and outside diameter. It is handy when you are checking a delivery against the mill tag, planning a crane or forklift lift, working out freight or deciding how much of a coil is left on the decoiler. Enter sizes in millimetres or inches, and the answer is shown in kilograms, pounds and metric tonnes. For example, a steel coil 1,250 mm wide with a 500 mm inside diameter and a 1,500 mm outside diameter weighs about 15,413 kg (33,981 lb).

The default material is carbon steel at 7,850 kg/m³. Stainless steel (8,000 kg/m³) and aluminum (2,700 kg/m³) are one click away, and you can type your own density for another grade. If you also enter the strip thickness, the calculator shows the strip length on the coil.

Steel coil weight formula

A coil is a hollow cylinder of metal. The weight is the volume of that cylinder, which is the area of the ring between the two diameters times the coil width, multiplied by the density.

Metric formula

Weight (kg) = π ÷ 4 × (OD² − ID²) × Width × Density, with OD, ID and width in metres and density in kg/m³

If you measure in millimetres, divide the answer by 1,000,000,000 (one billion) because there are that many cubic millimetres in a cubic metre.

Imperial formula

Weight (lb) = π ÷ 4 × (OD² − ID²) × Width × 0.2836, with OD, ID and width in inches

The figure 0.2836 is the density of carbon steel in lb/in³. Use 0.2890 for stainless steel and 0.0975 for aluminum.

Worked example 1: metric

A steel coil is 1,250 mm wide with a 500 mm inside diameter and a 1,500 mm outside diameter.

Ring area = π ÷ 4 × (1,500² − 500²) = 1,570,796 mm². Volume = 1,570,796 × 1,250 = 1,963,495,408 mm³. Weight = volume × 7,850 ÷ 1,000,000,000 = 15,413 kg, which is about 33,981 lb or 15.41 tonnes. If the strip is 1.5 mm thick, the strip length on the coil is about 1,047 m.

Worked example 2: imperial

A steel coil is 48 in wide with a 20 in inside diameter and a 60 in outside diameter.

Ring area = π ÷ 4 × (60² − 20²) = 2,513.3 in². Volume = 2,513.3 × 48 = 120,637 in³. Weight = volume × 0.2836 = 34,213 lb, which is about 15,519 kg. For 16 gauge strip (0.0598 in) that is roughly 3,502 ft of strip.

How to calculate steel coil length from weight

If you know the weight and the strip size, divide the weight by the weight of one unit of length.

Length = Weight ÷ (Width × Thickness × Density), all in one consistent unit system

From the diameters instead, Length = π × (OD² − ID²) ÷ (4 × Thickness). Both agree for a tightly wound coil.

Imperial example: a 20,000 lb steel coil is 48 in wide and 16 gauge (0.0598 in) thick. Length = 20,000 ÷ (48 × 0.0598 × 0.2836) = 24,569 in, which is about 2,047 ft (624 m) of strip.

Density and material factors

The only thing that changes between metals is the density. These are typical values. Published figures vary slightly between sources and grades, so use your supplier's number when you have it.

MaterialDensity (kg/m³)Density (lb/in³)Weight of 1 cubic foot (lb)
Carbon steel7,8500.2836490.1
Stainless steel8,0000.2890499.4
Aluminum2,7000.0975168.6

Aluminum and stainless steel coil weight

The formula does not change, only the density does. For the 1,250 mm wide coil above (500 mm ID, 1,500 mm OD) the volume of metal is 1,963,495,408 mm³, so:

MaterialDensity (kg/m³)Weight (kg)Weight (lb)
Carbon steel7,85015,41333,981
Stainless steel8,00015,70834,630
Aluminum2,7005,30111,688

The same coil weighs about one third as much in aluminum as in steel. Pick the material in the calculator, or type your own density for a specific alloy.

What is PIW and how to calculate it

PIW means pounds per inch of width, the weight of a coil for each inch of strip width: PIW = coil weight (lb) ÷ width (in). A 20,000 lb coil that is 48 in wide has a PIW of 20,000 ÷ 48 = 416.7. PIW depends only on the diameters, so you can also multiply the PIW below by any width to get the weight. Values are for carbon steel at 7,850 kg/m³ and a solid ring with no air gaps.

Outside diameter (in)ID 20 inID 24 inID 30 in
36199.6160.488.2
40267.3228.1155.9
48424.1384.9312.7
54560.4521.2449.0
60712.8673.6601.4
66881.2842.0769.8
721,065.61,026.4954.2

The same idea in metric, in kg for each 100 mm of strip width:

Outside diameter (mm)ID 508 mmID 610 mmID 762 mm
900340.3270.0141.4
1000457.4387.1258.5
1200728.7658.4529.8
14001,049.3979.0850.4
15001,228.11,157.81,029.2
18001,838.51,768.21,639.6

Example: a 48 in wide coil with a 24 in inside diameter and a 60 in outside diameter weighs about 48 × 673.6 = 32,331 lb.

Frequently asked questions

What is the formula for steel coil weight?

Find the area of the ring between the outside and inside diameters, multiply by the coil width to get the volume, then multiply by the density. In metric units, weight equals pi divided by 4, times (OD squared minus ID squared), times width, times density. In imperial units, use inches and multiply by 0.2836 lb/in³ for carbon steel.

What is a typical coil inside diameter?

Steel coils are most often wound on a 20 inch (508 mm), 24 inch (610 mm) or 30 inch (762 mm) core. Check the coil tag or your supplier, because the inside diameter strongly affects the weight for a given outside diameter.

How do I find coil weight from length and thickness?

Multiply length by width by thickness to get the volume of metal, then multiply by the density. For example, 1,000 mm wide, 1.5 mm thick steel strip weighs 11.78 kg per metre of length. This only matches the outside diameter method if the coil is wound tightly with no gaps.

What is PIW (pounds per inch of width) in a steel coil?

PIW stands for pounds per inch of width. It is the weight of a coil for each inch of strip width, so PIW equals coil weight in lb divided by width in inches. A 20,000 lb coil that is 48 inches wide has a PIW of 416.7. Mills quote PIW because it depends only on the outside and inside diameters, so you can multiply it by any width. For example, a 60 inch OD coil on a 20 inch core has a PIW of 712.8, so a 48 inch wide coil weighs about 34,213 lb.

How much does steel coil weigh per linear foot?

Weight per linear foot in lb equals 40.84 times the thickness in inches times the width in feet. The 40.84 is the weight in lb of one square foot of steel that is one inch thick. For example, 48 inch (4 ft) wide strip at 16 gauge (0.0598 in) weighs 40.84 × 0.0598 × 4 = 9.77 lb per linear foot.

Why does the real coil weight differ from the calculated weight?

The calculator treats the coil as a solid ring of metal with 100 percent fill. Real coils have tiny air gaps between wraps, the outside diameter is measured by hand, and thickness varies within tolerance, so a coil is often slightly lighter than calculated. Use the result as a planning estimate and confirm it against the mill tag.

How do I calculate aluminum or stainless steel coil weight?

Use the same formula with the right density: stainless steel is 8,000 kg/m³ and aluminum is 2,700 kg/m³. Choose the material in the picker, or type your own density. A coil 1,250 mm wide with a 500 mm inside diameter and a 1,500 mm outside diameter weighs about 15,413 kg in steel, 15,708 kg in stainless steel and 5,301 kg in aluminum.

How many feet of steel are in a coil?

Divide the coil weight by the weight per linear foot of the strip. A 20,000 lb coil of 48 inch wide 16 gauge strip weighs 9.77 lb per foot, so there are about 2,047 feet in the coil. From the diameters, a 60 inch outside diameter, 20 inch inside diameter and 16 gauge strip (0.0598 in) give roughly 3,502 ft.

Need the outside diameter instead? Try the coil outer diameter calculator, or check flat sheet with the plate and sheet weight calculator.

Keep going

More handy tools

Advertisement